Linhai LANDBOSS LH800U-2D Service Manual page 73

CHAPTER 6 TRANSMISSION
Fig 69
28. Apply Loctite 510 sealant evenly on
the support surface of 4WD gearbox.
!Fig 70(page 14).
Fig 70
29. Assemble the 4WD coupling fixed
bushing B on the output drive shaft,
and lock it with the safe ring A
!Fig 71(page 14).
Fig 71
30. Assemble the box A and tighten the
four screws M8 L25 B and the two
screws M8(L120) C to a torque of
30Nm. !Fig 72(page 14).
Fig 72
Table 4. Shift Housing Components
A Shift housing cover
B Limit pole
C O-ring
D Shift shaft
E Driving gear
F Driven gear
G Spring
Shift cam !Fig 73(page 14)
H
Fig 73
31. Mount the driving gear E and the
driven gear F, as shown.
Important: The dent which be marked
must to mesh. !Fig 73(page 14).
Fig 74
CHAPTER 6
LH800U-2D SERVICE MANUAL
TRANSMISSION. 6- 16