Advertisement
data on all HDDs connected to the duplicator (including Source HDD) by
writing data to all sectors. There are 3 sub-options: One pass , 3 pass and 7
pass.
8. Setup
Enters the Setup menu. See Setup Options for details.
9. USB Mode
Not supported.
10. Adv Setup
Enters Advanced Setup Options menu. Only available when holding ESC on
any main menu option. See Advanced Setup Options.
Setup Options:
8-01. Language
Use this option to select the language of the system, currently only English is
supported.
8-02. Copy Size
Controls how much of the source drive to use for copy operations, in percent-
age. Default setting is ALL (100%).
8-03. Startup Menu
Sets the first menu option to appear after boot. Default setting is Copy HDD.
8-04. Auto Compare
Controls whether or not the target is compared automatically when copy is
complete. Default setting is OFF.
8-05. Copy with Size
Causes duplicate drive to report to an operating system the exact same total
size as source when copy is complete. Works only on drives formatted using
a Master Boot Record. Default setting is OFF.
8-06. Button Sound
Enables audible beep when pressing buttons. Default setting is ON.
8-07. Device Info
Displays information about connected drives. Main display is drive manufac-
turer and size. Press up/down to select drives, ENT to display model number
and firmware revision of selected drive.
8-08. System Info
Displays firmware version and date.
www.addonics.com
Technical Support (M-F 8:30am - 6:00pm PST)
Phone: 408-453-6212
Email: www.addonics.com/support/query/
Advertisement
