CyberData 011186 Operation Manual page 61

2. On the Autoprovisioning Configuration page, you may enter values for the parameters
Autoprovisioning
Enable Autoprovisioning
Get Autoprovisioning from DHCP
Download Protocol
Autoprovisioning Server (IP Address) See
Autoprovisioning Filename
Autoprovisioning Autoupdate 
(in minutes)
Autoprovision at time (HHMMSS)
Autoprovision when idle
(in minutes > 10)
Clock
NTP Server
Posix Timezone String
Set Time with External NTP Server on
boot
Periodically update with time server
Time update period (in hours)
Current Time
Current Time in 24 hour format
(HHMMSS)
Operations Guide
indicated in Table 2-17.
Table 2-17. Autoprovisioning Configuration Parameters
Web Page Item
See Section 2.4.12.1,
See Section 2.4.12.1,
Allows you to select whether the autoprovisioning file is acquired
via TFTP or HTTP.
Section 2.4.12.1, "Autoprovisioning"
Type the desired name for the autoprovisioning file.
Type the desired time (in minutes) that you want the
Autoprovisioning feature to update (6 character limit).
Note: A value of 0 will disable this option.
Type the desired time of day that you want the Autoprovisioning
feature to update (must be 6 characters).
Note: An empty value will disable this option.
Type the desired time (in minutes greater than 10) that you want
the Autoprovisioning feature to update after a certain amount of
idle time (6 character limit).
Note: A value of 0 will disable this option.
Press the Get Autoprovisioning Template button to create an
autoprovisioning file for this unit. See
Autoprovisioning Template Button"
Allows you to select the NTP server (64 character limit).
See Section 2.4.12.3, "Time Zone Strings"
(43 character limit).
When selected, the time is set with an external NTP server when
the device restarts.
When selected, the time is periodically updated with a time
server.
Allows you to select the time updated period (in hours) 
(4 character limit).
Allows you to set the time from the NTP server.
Allows you to input the current time in the 24 hour format.
(6 character limit)
Click on this button to set the clock after entering the current time.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
930796B
Installing the VoIP Outdoor Intercom
Description
"Autoprovisioning".
"Autoprovisioning".
(15 character limit).
Section 2.4.12.2, "Get

CyberData Corporation
54
Intercom Setup