JVC GY-HM660U Instruction page 147

Audio (Lch)
Video
GND
Audio (Rch)
AV input
.
* Select the output signal in [A/V Set] B [HDMI/SDI
Out].
(A P112 [ HDMI/SDI Out ] )
* When [Record Format] B [System] is set to "SD",
only SD-SDI signals are output.
(A P117 [ System ] )
* To display the menu screen or display screen on
an external monitor, set [A/V Set] B [Video Set]
B [Display On TV] to "On".
(A P112 [ Display On TV ] )
DEVICE
AV
REMOTE
HOST
DC
SDI IN
HDMI
Connecting via SDI
Digital video signals, together with embedded
0
(superimposed) audio signals and time code
signals, are output for both the HD-SDI and SD-
SDI signals.
User's bit output from the [HD/SD SDI] output
0
terminal is used as a flag to determine valid
video signals. Therefore, accurate values will
not be output.
Memo :
The sampling frequency for embedded
0
(superimposed) audio signals is 48 kHz. Time
code of the built-in time generator as well as
playback time code are also output.
Setting the Aspect
For setting the mode to convert images with a
0
16:9 aspect ratio to display on a 4:3 aspect ratio
screen.
Set using [A/V Set] B [Video Set] B [SD
0
Aspect].
The available modes include "Side Cut", "Letter"
0
(blackened at the top and bottom), and
"Squeeze" (full size, compressed at the left and
right).
(A P119 [ SD Aspect ] )
Memo :
When [Record Format] B [System] is set to "SD",
0
and [SD Aspect] is set to "4:3", this item cannot be
selected.
(A P117 [ System ] )
(A P119 [ SD Aspect ] )
147