Time Code And User's Bit - JVC GY-HM660U Instruction

Time Code and User's Bit

Time code and user's bit data are recorded with the
video in this camera recorder.
The time code and user's bit are displayed on the
viewfinder and LCD monitor during playback or
recording. (Display screen)
Displaying Time Code and User's Bit
The time code and user's bit are displayed on the
viewfinder and LCD monitor during playback or
recording.
The display differs according to the menu settings.
1 Set [Main Menu] B [LCD/VF] B [Display
Settings] B [TC/UB] to settings other than
"Off".
(A P111 [ TC/UB ] )
When "TC" or "UB" is selected, time code or
user's bit data is displayed respectively on the
display screen.
F F EE DD 20
0 0 : 0 0 : 0 0 . 0 0
4030 20 10 0
P 13000K
.
Memo :
Values recorded on the SD card is displayed in
0
Media mode.
66
00: 00: 00.00
Jan 12,2016
12 :34 :56
5 . 6f t
ND 1 /64
AE 6
+
0
dB
F1.6
1/ 100
Time Code Operation Mode
Set the time code operation in [Main Menu] B [TC/
UB] B [TC Generator].
(A P107 [ TC Generator ] )
Setting
Free Run(Ext) This mode synchronizes another
camera recorder connected to the
[TC] terminal. The time code
operates in the run mode at all
times regardless of the recording
status.
It continues to run even when the
power of the camera recorder is
turned off.
Free Run The time code operates in the run
mode at all times regardless of the
recording status.
It continues to run even when the
power of the camera recorder is
turned off.
Rec Run The time code operates in the run
mode during recording. It
continues to run in the order of the
recorded clips as long as the SD
card is not replaced. If the SD card
is removed and recording is made
on another card, time code will be
recorded on the new card from
where it was left off in the previous
card.
Regen The time code operates in the run
mode during recording. When the
SD card is replaced, the last time
code recorded on the card is read
and recorded on a new card so that
the time code continues in running
order.
(A P67 [Setting Time Code] )
Memo :
When [Main Menu] B [System] B [Record
0
Set] B [Rec Mode] is set to "Variable Frame",
"Interval Rec" or "Frame Rec", and [TC
Generator] is set to "Free Run" or "Free
Run(Ext)", Rec Run is activated.
When [Main Menu] B [System] B [Record Set]
0
B [Record Format] B [WFormat]/[YFormat] is
set to "AVCHD", Pre Rec enters Free Run mode.
(A P118 [WFormat a, Format b] )
(A P119 [ Y Format a ] )
Description