Restoring The Sd Card - JVC GY-HM660U Instruction

6 Formatting is complete.
When formatting is complete, "Complete" appears
and the camera recorder returns to the [Format
Media] screen.
Memo :
During formatting, menu operation is
0
unavailable but you can start recording.
However, this is only available when a
recordable SD card is inserted in the other slot.
Formatting cannot be performed in the following
0
cases.
Recording is in progress on the SD card to be
0
formatted.
SD card is not inserted.
0
Write-protect switch of the SD card is set (z
0
is displayed).
Caution :
If you format the SD card, all data recorded on
0
the card, including video data and setup files,
will be deleted.

Restoring the SD Card

It is necessary to restore the SD card if an
abnormality occurs to the data in the card due to
some reasons.
Memo :
[!RESTORE] appears at the remaining media
0
display area when an SD card that requires
restoring is inserted.
1 Select [System] B [Media] B [Restore
Media].
(A P115 [ Restore Media ] )
2 Select the SD card to be restored and press
the Set button (R).
.
42
3 Restoring starts.
.
4 Restoring is complete.
When restoring is complete, "Complete"
0
appears and the camera recorder returns to the
[Restore Media] screen.
When no media that requires restoring is
0
inserted, the camera recorder returns to the
[Media] menu screen.
Caution :
[Restore Media] can only be selected in Camera
0
mode. However, it cannot be selected while the
camera recorder is recording. Select [Restore
Media] in Camera mode when the camera
recorder is not recording.
[Restore Media] does not restore the SD card to
0
its original states completely. If restoring fails,
replace or format the SD card. Take note that
formatting erases all the information inside the
SD card.
Restoring cannot be performed in the following
0
cases.
2
Camera recorder is recording in progress.
0
SD card is not inserted.
0
Write-protect switch of the SD card is set (z
0
is displayed).