Selecting And Performing Operations On Multiple Clips; Selecting Multiple Clips Randomly - JVC GY-HM660U Instruction

During Playback or Pause Screen
1 Press [FOCUS ASSIST/1] button during clip
playback.
If the clip does not have an OK mark, an OK
0
mark will be appended.
If the clip is appended with an OK mark, the
0
OK mark will be deleted.
1000/2000 1000/2000
282min 282min
1920x1080 1920x1080
60i 60i HQ HQ
40 4030 30 20 20 10 10 0
1000/2000
.
Memo :
The clip pauses when an OK mark is appended
0
or deleted during playback.
Appending/Deleting OK Mark of
Multiple Clips
To select and append/delete OK mark for multiple
clips, refer to "[Selecting and Performing
Operations on Multiple Clips] (A P 91)".
Selecting and Performing
Operations on Multiple
Clips
Multiple clips can be selected during thumbnail
0
screen or playback screen display.
After selecting multiple clips, perform
0
appending/deleting of OK mark, deleting of clips
using the action selection screen.
After selecting multiple clips, the selections will
0
be canceled by the following operations.
When [Deselect All] in the action menu is
0
selected
When exiting Media mode from the thumbnail
0
screen
When removing the SD card
0
When switching the slot in use
0
00:00:00.00 00:00:00.00
Jan 12,2016 Jan 12,2016
12:34:56 12:34:56
OK Mark

Selecting Multiple Clips Randomly

1 Move the cursor to a clip without check
mark, and press the [OIS/2] button.
A green check mark appears on the clip.
.
2 Repeat Step 1 to select multiple clips.
Multiple clips can be selected.
0
Press the [LOLUX/3] button while the
0
multiple clips are selected.
Appends OK mark together:
0
[Add OK Mark] B [Selected Clips]
Deletes OK mark together:
0
[Delete OK Mark] B [Selected Clips]
Uploading selected clips to the FTP server
0
together a :
[FTP Upload] B [Selected Clips]
Deletes selected clips together:
0
[Delete Clips] B [Selected Clips]
Memo :
Selecting clips appended with check mark and
0
pressing the [OIS/2] button will cancel the
selection.
If the operation is performed on multiple clips at
0
the same time, a progress bar appears. You can
stop the operation by pressing the Set button (R)
while the operation is in progress. However, it is
not possible to undo operations that are
completed.
1
91