Setting Time Code Generator - JVC GY-HM660U Instruction

Setting Time Code
Generator
Presetting the Time Code
Time code and user's bit data generated from the
internal time code generator are recorded.
This section describes how to set [TC/UB] B [TC
Preset].
(A P107 [ TC Preset ] )
Memo :
When [Main Menu] B [System] B [Record Set]
0
B [Record Format] B [Frame & Bit Rate] is set
to "50p", "50i", "25p", or "24p", "Drop" cannot be
selected.
(A P118 [WFrame & Bit Rate a, Frame & Bit
Rate b] )
You can configure the setting without accessing
0
the [TC/UB] menu screen.
(A P68 [Setting Time Code without Opening
the Menu] )
Required Settings Before Preset
1 Set [TC/UB] B [TC Generator] to "Rec
Run" or "Free Run".
(A P107 [ TC Generator ] )
[Rec Run]:
0
Preset data in the time code generator
operates in run mode during recording
mode. Set this when recording continuous
time code in connecting frames.
[Free Run]:
0
Time code starts to operate in run mode from
the preset time in the time code generator.
2 Select the framing mode for the time code
generator (only when the frame rate setting
is "60" or "30").
Set using [Main Menu] B [TC/UB] B [Drop
Frame].
(A P107 [ Drop Frame ] )
[Drop]:
0
Sets the run mode of the time code generator
to drop frame mode. Use this setting when
placing emphasis on the recording time.
[Non Drop]:
0
Sets the run mode of the time code generator
to non-drop frame mode. Use this setting
when placing emphasis on the number of
frames.
Memo :
Drop frame/non-drop frame mode
When the frame rate setting in [Main Menu] B
0
[System] B [Record Set] B [Record Format] B
[Frame & Bit Rate] is "60p", "60i", or "30p", the
actual number of frames per second is
approximately 59.94 (29.97). However, the time
code processing standard is "60p", "60i", or
"30p" frames. To make up for the frame number
discrepancy, the drop frame mode (Drop) drops
the 00 frame and 01 frame every minute except
for minutes that are multiples of 10. However, in
the case of "60p", the 00, 01, 02 and 03 frame
are dropped.
The non-drop frame mode (Non Drop) does not
0
drop frames and ignores the discrepancy with
the actual time.
Setting Time Code
MENU/THUMB
AE LEVEL
CANCEL
.
MENU/THUMB
CANCEL
OIS / 2 LOLUX / 3
67