Frequently Asked Questions - Miele DGC 6700 Operating And Installation Instructions

The following faults can be corrected without contacting the Miele Service Depart-
ment.
If in doubt, please contact Miele.

Risk of injury! Improperly performed installation, maintenance or repair work
can pose a serious danger to users of the appliance.
Installation, maintenance and repairs may only be carried out by Miele autho-
rized technicians.
Do not attempt to open the housing.
Problem
You cannot turn the ap-
pliance on.
The steam oven does
not heat up.
The fan can still be
heard after the appli-
ance has been turned
off.
A humming sound can
be heard after switching
on the appliance, during
operation and after
turning off the appli-
ance.

Frequently asked questions

Possible cause and solution
The circuit breaker has tripped.
 Reset the circuit breaker (see data plate for the
correct fuse rating).
There may be a technical fault.
 Disconnect the appliance from the power supply
for approx. 1 minute:
– tripping the relevant circuit breaker or screwing
the fuse out completely, or
– tripping the ground fault circuit interrupter
(GFCI).
 If the steam oven still will not turn on, contact a
qualified electrician or Miele Service.
Demonstration mode is active
 Deactivate Demo mode (see "Settings – Show-
room Program").
The fan is still running.
The appliance is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will turn itself off automatically after a while.
This is not a fault. It is made by water being pumped
through the system.
155