Table of Contents
Advertisement
With the help of the following guide minor faults in the performance of the ma-
chine, some of which may result from incorrect operation, can be remedied with-
out contacting the Service Department. Time and money will be saved because a
service call will not be needed.
This guide may help you to find the reason for the fault, and how to correct it.
Problem
You cannot turn the ap-
pliance on.
The oven does not heat
up.
The fan can still be
heard after the appli-
ance has been turned
off.
A humming sound can
be heard after switching
on the appliance, during
operation and after
turning off the appli-
ance.
Frequently Asked Questions
Possible cause and solution
The circuit breaker has tripped.
Reset the circuit breaker (see data plate for the
correct fuse rating).
There may be a technical fault.
Disconnect the appliance from the power supply
for approx. 1 minute:
– tripping the relevant circuit breaker or screwing
the fuse out completely, or
– tripping the ground fault circuit interrupter
(GFCI).
If the steam oven still will not turn on, contact a
qualified electrician or Miele Service.
Demo mode is activated.
The steam oven can be operated, but the oven heat-
ing does not work.
Deactivate Demo mode (see "Settings – Show-
room Program").
The oven interior has been heated by a heating
drawer operating beneath it.
Open the door and let the oven cool down.
The fan is still running.
The appliance is fitted with a fan which removes
steam from the oven. The fan will continue to run for
a while after the appliance has been switched off. It
will turn itself off automatically after a while.
This is not a fault. It is made by water being pumped
through the system.
159
Advertisement
Table of Contents
