Water Hardness; Showroom Program; Demo Mode - Miele DGC 6700 Operating And Installation Instructions

Settings

Water hardness

The steam oven is factory set for
water. It must be adjusted local water
hardness to ensure trouble-free opera-
tion and to ensure that descaling is car-
ried out at the correct interval. The
harder the water, the more often it will
need to be descaled.
–
Soft
< 8.7 °gr/gal, < 1.5 mmol/l
– Medium
8.7 - 14.6 °gr/gal, 1.5 - 2.5 mmol/l
– Hard
> 14.6 °gr/gal, > 2.5 mmol/l
142

Showroom program

Hard This mode enables the oven to be
demonstrated in showrooms without
heating up. It should not be set for do-
mestic use.

Demo mode

If demo mode is activated
active. The appliance will not heat up
appear when the steam oven is turned
on.
– On
Press OK for at least 4 seconds to
activate demo mode.
– Off
Press OK for at least 4 seconds to
deactivate demo mode. The steam
oven can then be used as normal.
Demo Mode
will