Table of Contents
Advertisement
With the help of the following guide minor faults in the performance of the
machine, some of which may result from incorrect operation, can be remedied
without contacting the Service Department.
This guide may help you to find the reason for the fault, and how to correct it.
Problem
The display is dark.
System Lock
display when the oven
is turned on.
The oven does not heat
up.
Power Failure - Program
Canceled
appears in the
display.
appears in the
12:00
display.
Maximum Operating Hours
Reached
appears in the
display.
Possible cause and solution
The time of day display is deactivated. When the
appliance is turned off, the time of day display is
turned off.
As soon as the oven is turned on, the time of day
will appear. If you want it to be displayed
continuously, the setting to turn the time of day
display back on must be changed (see "Settings –
Time of day – Display").
There is no power to the appliance.
Check if the breaker has tripped. If it has, contact
a qualified electrician or Miele Technical Service.
in the
The system lock is On.
Press and hold the icon for at least 6 seconds to
unlock the oven for 1 cooking program.
To permanently deactivate the lock, see "Setting -
System Lock".
Demo mode is activated.
The oven can be operated but will not heat up.
Deactivate Demo mode (see "Settings –
Showroom Program").
There has been a power failure which has caused the
current cooking process to stop.
Turn the oven off and then back on again.
Restart the cooking process.
The power supply was interrupted for longer than 200
hours.
Reset the date and time.
The oven was operated for an unusually long period
of time. The Safety cut-out feature has been
activated.
Confirm with OK. Clear the message
Finished
The oven is now ready to use.
Frequently Asked Questions
by selecting "Back".
Program
87
Advertisement
Table of Contents
