Datavideo SE-2800 Instruction Manual page 18

DIGITAL VIDEO SWITCHER
Speed Buttons Setting
Wipe Buttons Setting
Outputs Mode
DSK Settings
BG Color Setting
T-Bar Mode
1kHz to Bars
Keys Brightness
Keys Mode
Audio Level is shown
Reference
Aux
Factory Settings
Clock Settings
Multi Screen Mode
GPI Settings
Countdown Timer Settings
Audio Associations
Multi Screen Audio
18
Speed1
Speed2 Range 1 to 127 (Frames)
Speed3
Wipe
Soft Edge
Buttons 1 to 6 Color
1=White, 2=Yellow, 3=Cyan, 4=Green, 5=Magenta, 6=Red, 7=Blue,
8=Black
OUT 1 is an HD SDI only user choice of
OUT 2 user choice of Standard & Format
Plus MODE
OUT 3 has the same user choices as OUT 2
Titles + a-CH mode (alpha channel)
Titles 1
Luma Key mode
Titles 2
Luma Key Level 0 (black) to 255 (white)
User choice of background colour from 1 to 9
1=White, 2=Yellow, 3=Cyan, 4=Green, 5=Magenta, 6=Red, 7=Blue, 8=Black,
9 = SMPTE 75% colour bars
One Way Mode = T-Bar operates transition in only one direction
Two Way Mode = T-Bar operates transition in both directions
When BG Color Setting option above = 9
1kHz tone can be ON or OFF depending on tick selection
User choice of 1 to 4
Brightness of keyboard buttons, 1= Low, 4= High
Tick selection ON or OFF, ON=Active buttons are Red, OFF=Green is Active
Tick selection ON or OFF, ON=Audio Peak Meters shown on HDMI Multi-view
External Tick selection for ON or OFF
Mode Choice of HD Analog 3 Level Signal
Or SD Composite PAL/NTSC
H-Timing Zero to 15
The value shown here relates to the selected input – See page 16 also.
This setting is also related to the Outputs Mode on page 17.
Tick selection ON or OFF, ON= Reset all settings to their default values.
X-Position (Left to right)
Y-Position (Lower to Upper) = 000 to 135
Set Hours
Set Minutes
Clear Seconds
This selection relates to the HDMI outputs 1 (=W1) and 2 (=W2).
A : W1 = PGM + PVW + 3 IN ; W2 = 9 IN
B : W1 = PGM + PVW + 12 IN ; W2 = PGM
C : W1 = PGM + PVW + 8 IN ; W2 = PGM
D : W1 = PGM + PVW + 12 IN ; W2 = W1
E : W1 = PGM + PVW + 8 IN ; W2 = W1
Input Select = Chosen input number
Time Delay = In frames between 1 to 75
Each input can selected for Count Down ON or OFF.
If Count Down is ON then the Down Counter value is set in minutes and seconds (MM:SS)
- Max.= 1 Hour or 60:00, Default = 15 Seconds or 00:15
Input channels 1-12, Value 1-12
( used to choose an embedded audio source – see page 29 onwards for more details )
Tick selection of Program or Preview audio on the HDMI outputs.
1 to 8 (See page 13 also)
0 to 4
1 to 8
Program
Program Logo Free
Program Logo & Titles Free
Preview
Aux
HD SDI
SD SDI 4:3
SD SDI 16:9
choice of Program
Program Logo Free
Program Logo & Titles Free
Preview
Aux
= 000 to 110
See page 11 also.