Canon laser Shot LBP 3300 Getting Started Manual page 24

2
Open the expansion slot cover.
3
Connect the B-type (square) end of the USB cable to the
USB connector on the printer, then close the expansion slot
cover.
Step
5
24
4
Connect the A-type (flat) end of the USB cable to the USB
port on the computer.
5
Turn the computer on and start up Windows.
IMPORTANT
If a Wizard appears by the Plug and Play automatic setup, click [Cancel],
and then install the CAPT software using this procedure.
6
Insert the supplied "LBP3300 User Software" CD-ROM into
the CD-ROM drive.
NOTE
If CD-ROM Setup does not appear, select [Run] from the [Start] menu,
enter "D:\English\MInst.exe", and then click [OK].
(The CD-ROM drive name is indicated as "D:" in this manual. The CD-
ROM drive name may differ depending on the computer you are using.)