Canon laser Shot LBP 3300 Getting Started Manual page 16

1
Pull out the paper cassette.
Step
3
CAUTION
Be sure to take the paper cassette out of the printer before loading
paper. If paper is loaded while the paper cassette is partially pulled
out, the paper cassette may drop or the printer may become
damaged resulting in personal injury.
2
While holding the lock release lever of the side paper
guides, slide the guides to the mark for the size of the paper
to be loaded.
The side paper guides move together. Align the position of (A) with the mark for
the size of the paper to be loaded.
16
(A)
NOTE
If you are using B5 size paper (182 mm x 257 mm), set the paper guide to
"JIS B5".
3
While holding the lock release lever of the rear paper guide,
slide the guide to the size mark for the paper to be loaded.
Align the position of (A) with the mark for the size of the paper to be loaded.
IMPORTANT
Do not use the "8.5 x 13" position.
4
Load the paper stack so that the rear edge is aligned with
the paper guide.
(A)