Canon laser Shot LBP 3300 Getting Started Manual page 17

CAUTION
When loading paper, take care not to cut your hands with the edges
of the paper.
IMPORTANT
•
Be sure to check if the paper guide is at the position of the size of the
loaded paper. If the paper guide is set at a wrong position, this may result
in misfeeds.
•
If you use paper that has been poorly cut, multiple sheets of paper may be
fed at once. In this case, fan the paper thoroughly, and then align the
edges of the stack on a hard, flat surface.
NOTE
To print letterhead paper or paper printed with a logo, load the paper so
that the printing side is facing down, as shown in the following figure.
( : Feeding direction)
5
Hold down the paper as shown in the figure, make sure that
the paper stack does not exceed the load limit marks (A),
and then set it under the hooks (B) on the paper guides.
Make sure that there is sufficient space between the hooks of the paper guides
and the paper stack. If there is no sufficient space, slightly reduce the amount of
paper.
IMPORTANT
The following shows the paper capacity of the paper cassette. Be sure that
the paper stack does not exceed the load limit marks on the paper guides.
If the paper stack exceeds the load limit marks, this may result in misfeeds.
- Plain paper Approx. 250 sheets (When plain paper that weighs 64 g/
2
m is used)
- Heavy paper Approx. 200 sheets (When heavy paper that weighs 91g/
2
m is used)
(A)
(B)
(B)
Step
3
17