Canon laser Shot LBP 3300 Getting Started Manual page 21

I Face-up Output Slot
Printed paper is output to the face-up output slot on the rear of the printer
unit with the printed side facing up. The face-up output slot is suitable to
print transparencies, labels, or envelopes which tend to curl, since the
printed paper is output flattened.
IMPORTANT
•
Be sure to close the output selection cover before performing automatic 2-
sided printing.
•
When paper is output to the face-up output slot, take out one piece at a
time each time it is output.
•
The face-up output slot and its surroundings become hot during or
immediately after using the printer. Do not touch the face-up output slot
and its surroundings when removing the jammed paper or performing the
related operation.
Switching to the Face-up Output Slot
When switching an output tray to the face-up output slot, open the output
selection cover as shown in the figure.
Switching to the Face-down Output Tray
When switching an output tray to the face-down output tray, close the output
selection cover as shown in the figure.
Step
3
21