Loading Paper In The Manual Feed Slot - Canon laser Shot LBP 3300 Getting Started Manual

6
Set the paper cassette in the printer.
Push the paper cassette into the printer firmly until the front side of the paper
cassette is flush with the front surface of the printer.
Step
3
G Paper Level Indicator
The paper cassette has a paper level indicator (A) that shows the
amount of paper remaining in the cassette. If the cassette is full, the
paper level indicator is at the top. Because the indicator moves down
as the amount of paper drops, this gives a rough estimate of the
amount of paper remaining.
This printer's paper cassette cannot automatically detect the paper size. Therefore,
you need to register the size of the paper loaded in the paper cassette.
See "Registering the Size of the Paper in the Paper Cassette" (p. 30) to register the
paper size after installing the CAPT software (p. 23).
18
(A)

Loading Paper in the Manual Feed Slot

The manual feed slot can be loaded with plain paper (60 - 90 g/m
A4, B5, A5, Legal, Letter, and Executive. Heavy paper, transparencies, labels,
Envelope DL, Envelope COM10, Envelope C5, Envelope Monarch, Index Card,
or custom size paper that is 76.2 to 215.9 mm wide and 127.0 to 355.6 mm
long can also be loaded.
Be sure to load paper in portrait orientation when loading it in the manual feed
slot.
IMPORTANT
•
The manual feed slot can be loaded with only one sheet of paper.
•
Make sure that the printer is not operating and the
(green) is on when loading paper in the manual feed slot. However, when
printing multiple copies or multiple pages from the manual feed slot, make
sure that the printer is not operating and the
(orange) is blinking before loading the second and subsequent paper. If
paper is loaded in the manual feed slot while the printer is operating such
as when the printer is printing or immediately after outputting paper, the
loaded paper may be output without being printed, or this may result in
paper jams.
•
Do not touch the paper in the manual feed slot or pull it out during printing.
This may result in a faulty operation.
2
) at sizes of
(Ready) indicator
(Load Paper) indicator