Canon laser Shot LBP 3300 Getting Started Manual page 45

Parts and Their Functions
a
f
a a a a Printer Connector
Connects to the printer. Do not touch the connector directly with your
hands.
b b b b LAN Connector
Connects to a 10BASE-T/100BASE-TX LAN cable.
c c c c 100 Indicator (Green)
Comes on when the network board is connected to the network by
100BASE-TX. Does not come on when connected by 10BASE-T.
d d d d LNK Indicator (Green)
Comes on when the network board is connected to the network properly.
e e e e ERR Indicator (Orange)
Comes on or blinks when the network board is not working properly.
MAC Address
f f f f
It is required when setting the IP address using the ARP/PING command.
It may be also required when installing the printer driver.
b
1
1 0 0
L N K
c
E R R
d
C 1
N B -
e
2
Installing the Network Board
Install the network board in the expansion slot of the printer using the
following procedure. A Phillips screwdriver is required for installing the
network board. Have a screwdriver ready in advance that matches the size of
the screws.
Open the expansion slot cover.
Turn the printer and computer OFF a, remove the USB
cable b, and then disconnect the power plug from the AC
power outlet c.
b
a
Step
6
c
a
45