Table of Contents
Advertisement
Operation
Configuration
(Standalone)
Auto Programs
Edit Custom
Programs
Master/Slave
Color Settings
-12-
Use standalone configuration to operate the product without a DMX controller.
Auto programs allow for dynamic RGBW color mixing without a DMX controller.
1. Go to the AUTO PRPGRAM main level.
2. Select the desired auto (AUTO1-10) and (Speed 000-255) or custom program
(PROGRAM1-10).
You cannot edit any of the auto programs (AUTO1-10); however, you can edit the custom
programs (PROGRAM1-10). See
This setting allows the programming of up to 30 scenes for each of the 10 customizable
programs, including colors and effects.
1. Go to the EDIT main level.
2. Select the desired auto program (PROGRAM01-10).
3. Select the desired scene (SCENE 01–30).
4. Select the desired color or effect (RED, GREEN, BLUE, WHITE, STROBE, TIME, or
FADE).
5. Select the color or effect value (000–255).
6. Repeat for the other colors or effects.
7. Return to the scene (SCENE 01–30) level.
8. Repeat the settings of colors and effects for the other scenes.
The Master/Slave mode allows a group of COLORado 1 Solos (the slaves) to simultaneously
duplicate the output of another COLORado 1 Solo (the master) without a DMX controller.
1. Set each of the slaves:
a. Go to the RUN MODE main level.
b. Select SLAVE.
2. Set the master:
a. Set the running mode to DMX as explained in
b. Select an auto or custom program as explained in
colors.
·
The master is the one that runs a program whether in Auto, Custom or Static Color
mode.
·
Do not connect a DMX controller to the products configured for Master/Slave
operation. The DMX controller may interfere with signals from the master.
·
The master should be the first product in the daisy chain.
The COLOR setting determines how the COLORado 1 Solo generates the white color based on
various RGB settings.
1. Go to the SETTING main level.
2. Enter the master access passcode as described in Passcode.
3. Select COLOR.
4. Select OFF, RGBW, or UC.
OFF:
When all the RGB faders are set to 255, the output is maximum, although
the resulting white color may not be balanced.
RGBW:
When all the RGB faders are set to 255, the resulting output is defined by
the configured white color (see
UC:
When all the RGB faders are set to 255, the output matches that of less
efficient products (Universal Color).
Edit Custom Programs
DMX
White
Calibration).
for details.
Control.
Auto
Programs, or a static mix of
COLORado 1 Solo User Manual Rev. 1
Advertisement
Table of Contents
