Tour Notes; Master Dimmer; Red, Green, Blue, And White Color Selection; Color Macros - Chauvet COLORado 1 Solo User Manual

Hide thumbs Also See for COLORado 1 Solo:
Table of Contents

Advertisement

Operation

TOUR Notes

Master Dimmer

Red, Green, Blue,
and White Color
Selection

Color Macros

Strobe

Auto/Custom

Zoom

Dimmer Speed

-16-
These notes clarify the way the TOUR DMX personality works.
·
Channel 1 controls the intensity of the currently projected color.
·
When the slider is at the highest position (100%), the intensity of the output is at maximum.
·
Channels 2 through 5 control the intensity ratio of each of the red, green, blue, and white
LEDs.
·
When these channels are at the highest position (100%), the intensity of each color is at
maximum if SETTING > COLOR is OFF.
·
You can combine channels 2 through 5 to create over one trillion colors.
·
Channel 6 selects the required color macro.
·
Channel 6 has priority over channels 2 through 6.
·
Channel 1 controls the intensity of the color macro.
·
Channel 7 controls the strobe frequency (not the intensity) of channels 2 through 6.
·
Channel 7 can strobe channels 2 through 5 when not running macros, allowing the
individual faders (R, G, B, and W), as well as channel 1 (D), to control the output intensity.
·
Channel 7 can strobe channel 6 when running macros, allowing channel 6 to select the
macro and channel 1 to control the output intensity.
·
Channel 8 selects the preset auto programs AUTO01–10 or the custom programs
PROGRAM1-10.
·
When activating the custom auto programs PROGRAM1-10, you can control the step time
and fade time using channels 2 and 3, respectively.
·
Channel 8 has priority over channels 2 through 7.
·
Channel 9 controls the speed at which each auto program plays.
·
Channel 10 controls Zoom adjustment. This provides options to adjust the beam angle from
8 to 55 degrees.
·
Channel 11 resets the zoom lens to the home position.
·
Channel 12 selects the Dimmer mode and speed. Dimmer mode provides four different
options to simulate the dimming curve of an incandescent lighting product.
·
When dimmer is set to OFF, the changes in the RGBW and master dimmer faders are
linear.
·
When dimmer is set to DIM1–DIM4, DIM1 is the fastest dimmer curve and DIM4 is the
slowest.
COLORado 1 Solo User Manual Rev. 1

Advertisement

Table of Contents
loading

Table of Contents