Table of Contents
Advertisement
Setup
Mounting
Orientation
Rigging
Procedure
Mounting Diagram
-8-
Before mounting this product, read and follow the
Professional line of mounting clamps, go to http://trusst.com/products/.
Always mount this product in a safe position and make sure there is adequate room for
ventilation, configuration, and maintenance.
Chauvet recommends using the following general guidelines when mounting this product.
·
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
·
Make sure to mount this product away from any flammable material as indicated in the
Safety
Notes.
·
If hanging this product, make sure that the mounting location can support the product's
weight. See the
Technical Specifications
product.
·
When hanging this product, always secure to a fastening device using a safety cable. For
our CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
The COLORado 1 Solo comes with a double-bracketed yoke to which you can either attach
mounting clamps for hanging or simply use as a floor stand. You must supply your own
mounting clamps. Make sure the clamps are capable of supporting the weight of this product.
Use at least one mounting point per product. For our CHAUVET Professional line of mounting
clamps, go to http://trusst.com/products/.
Floor Mounting
When using only one mounting clamp, be sure to use a clamp with a captive bolt to
prevent accidental loosening.
for the weight-bearing requirements of this
Mounting Clamp
Overhead Mounting
Safety
Notes. For our CHAUVET
COLORado 1 Solo User Manual Rev. 1
Safety Cable
Advertisement
Table of Contents
