Programming - Fagor FET-5310 Instructions For Use Manual

EN 4 / PROGRAMMING YOUR MACHINE

• PROGRAMMING

Nature of the washing and
the temperature
1
Spin speed setting
• Programming a washing cycle:
1
— Turn the selector to choose the most suitable programme and washing temperature for
the type of fabric to be washed.
NB: Turning the selector to any position other than «
2
— Using the selector , choose:
- Either a suitable spin speed for your type of washing.
The spin speed is automatically restricted in the «Synthetics», «Delicates/Woollens» and
«Hand wash» programmes.
- Or drip dry.
The cycle will finish with a gentle spin at 100 rpm.
- Or stop with tub full of water.
Your machine will stop with the tub full of water before the final spin.
4
— Use the buttons to select any options you wish.
— Select immediate start by pressing «strat/pause»
— ... or you can choose to delay the cycle, using button
You can select the time to elapse before the cycle starts.
• Adding or removing an item during the cycle
— Press the «strat/pause» button
— Add or remove the items of laundry*.
(*) the time the lid remains locked depends on the temperature inside the machine and, for safety
reasons, may take several minutes if you are interrupting a cycle at more than 40°C.
— Press the «strat/pause» button
NB: If you have selected a delayed start, you can access the drum instantly at any time in the
period before the washing cycle starts without having to interrupt and restart the cycle.
• Cancelling while programming, washing or during a pause
1
Set the selector to the «
This can be done at any time during the cycle or during programming, or even during a pause.
NB :
- In all cases, after cancelling you must reprogramme everything from the start.
- If you have cancelled during the washing phase, remember to empty the water, if necessar.
• End of the cycle:
NB: After spinning, some models automatically position the drum opening at the top to provide
easy access to the washing. This operation lasts at most 3 minutes.
— Screen then displays "- 0 -", indicating that the cycle has finished.
1
to the «
Set the selector
You can now open the lid and remove your washing.
Display of remaining time or
delayed start
2
Delayed start setting
» provides power to the machine.
5
.
3
5
to interrupt the cycle.
5
to restart the cycle.
» position.
» position.
Start/Pause
A 5
4
3
Options
.
(impossible during spin)
38
Information:
All the
microswitches and do not remain
depressed.
In any case, the «start/pause» button
cannot cancel a programme.
Important:
Before starting your machine,
check that the power cable is plugged
in and the water tap is open. Also
ensure that the drum doors are closed
correctly and the machine's lid is shut.
During the "End of Cycle" phase, any
action on one of the controls (the
selectors or the buttons) returns you to
"Programming" mode. As a safety
measure, when the cycle is over, we
recommend that you unplug the power
cable and turn off the water tap.
Display and position of the selectors
In , display of the length of the selected
programme
for example:
Selector
- Position «800» for example
- Position «100»
- Position
Light(s) for the option(s) selected
Countdown in of the time remaining before the
end of the cycle
(the two dots flash throughout the whole of the cycle)
:
Countdown of the time is stopped in
(the displayed time flashes)
Resumption of the countdown in
(the two dots start flashing again)
1
Selector
All the indicator lights and the display are OFF
buttons are on
2
on
set to « »