Stitch Width; Stitch Length; Stitch Density - Husqvarna Viking Designer Diamond Royale User Manual

Stitch Width

settings are shown in black numbers, adjusted settings in
red.

Stitch Length

stitch will be longer. If lengthening a satin stitch where the
density can be adjusted, the entire stitch will be longer but
the density will remain the same.
Note: The set stitch width and the stitch length are shown between
the + and -. When trying to exceed minimum or maximum settings
for width and length, a warning sound will be heard.
The default setting is shown in black. Changed settings are shown in
red.
Button size
buttonhole foot, you can set the button size. Measure your
button and enter the button size in the button size control.
Button Sew On
When sewing a button, you can set the number of stitch

Stitch Density

of the entire stitch.
Note: This is often used with specialty threads and when a less dense
satin stitch is desired.
Mirroring
To mirror stitches or stitch programs sidewise touch
programs lengthwise touch Mirror End-to-End icon.
Note: Buttonholes cannot be mirrored.
4 Sewing
Stitch length -
Stitch density +
Mirror End-to-End
Mirror Side-to-Side
Stitch length +
Stitch density -
Mirror Mirror
End-to-End Side-to-Side
4:7 4:7