Husqvarna Viking Designer Diamond Royale User Manual page 88

embroidering.
Note: If Automatic Jump Stitch Trim is not activated the machine
will stop after stitching a few stitches. A pop-up message will appear
on the screen asking you to cut the thread end. Cut the thread and
press Start/Stop to continue embroidering.
asking you to change thread color. Re-thread with the
next color and continue embroidering by pressing
the top thread end and pull the thread to the underside
of the fabric.
and the needle thread is cut.
8. When the embroidery is completed, your machine
cuts the top thread and bobbin thread and stops. The
needle and presser foot raise automatically for easy
6:6
6 Embroidery Set Up