Design Positioning - Husqvarna Viking Designer Diamond Royale User Manual

DESIGN POSITIONING

a design on an exact location on your fabric. It is also used
embroidered design.
Note: If you just want to move your embroidery in Embroidery
Stitch-Out, open the Design Positioning window and move your design
using the Control or your stylus.
Use Zoom and Pan to be sure that you are placing the
in the Control.
Zoom to Cursor
Maximizes the zoom and pans the embroidery area so the
cursor position is centered on the screen.
Set needle point
8 Embroidery Stitch-Out
Design
Positioning
Wizard
Design Positioning
Control
Set needle
point icons
Zoom to
Cursor
8:7