Designs - Husqvarna Viking Designer Diamond Royale User Manual

DESIGNS

Royale ™
the sampler book.
DESIGNER DIAMOND Royale
SAMPLER BOOK
design. The suggested thread color for each color block is
shown.
CONNECT THE EMBROIDERY
UNIT
socket at the back of the machine.
unit plugs into the socket.
use the
turn it on.
The machine will calibrate and the embroidery arm will
Note: DO NOT calibrate the machine with the embroidery hoop
attached as this can damage the needle, presser foot, hoop and/or
the embroidery unit. Be sure to clear all materials from around the
machine before calibrating so that the embroidery arm does not bump
into anything while calibrating.
REMOVE THE EMBROIDERY UNIT
1. To store the embroidery unit in the embroidery case,
Park Position on the screen in either Embroidery Edit
2. Press the button at the left, underneath the embroidery
material, place in the soft carrying bag.
6 Embroidery Set Up
™
Royale
™
Park Position by selecting
A
6:3