STITCH WIDTH ADJUSTMENTS
The stitch width can be increased or decreased by changing the needle
position or with the cutting width dial.
Width Adjustment by Changing Needle Position
width is 6 mm.
Width Adjustment with the Cutting Width Dial
adjustment are possible within the range shown below.
•
When only the left needle is used: 5 - 7 mm
•
When only the right needle is used: 3 - 5 mm
•
When using the Chainstitch needle: 8 - 10 mm
Turn the dial to adjust the desired seam width. For standard setting the dial
should be set to N.
STITCH LENGTH ADJUSTMENT
The stitch length dial should be set to N for most sewing conditions.
Adjust the stitch length to 4 mm when sewing on heavyweight fabrics.
Adjust the stitch length to 2 mm when sewing on lightweight fabrics.
PRESSER FOOT PRESSURE ADJUSTMENT
The presser foot pressure for sewing based on normal conditions should
be set to N. Adjustments in some instances may be necessary. Increase or
on a sample of your fabric before sewing on your garment.
Decrease the pressure by turning the adjustment dial in counter-
clockwise direction to a value between N and 1.
Increase the pressure by turning the adjustment dial in
clockwise direction to a value between N and 5.
Turn the adjustment dial until the mark on the knob
is set to N.
4
STITCH ADJUSTMENTS
6 mm
5
1
2
N
4
5
4 – STITCH ADJUSTMENTS
35