Husqvarna Viking Designer Diamond Royale User Manual page 101

Select line positioning
Touch the select line positioning icon to open a pop-up.
baseline, on the baseline or under the baseline. The selected
positioning will affect all objects on the shape.
Select side positioning
the baseline. Touch the select side positioning icon to open
or left side of the objects along the baseline. The selected
setting will affect all objects on the actual shape.
Select design angle
select design angle icon to toggle between objects all lined
The setting affects all objects on the shape.
Duplicate/Delete Last Object
If you want to add a copy of the last object, use the
will be duplicated and the copy will be added after the last
object on the baseline.
If you want to delete the last object in the shape, touch the
will be deleted.
Note: If several designs are grouped before opening Design Shaping,
the entire group will be duplicated or deleted. Duplicate and Delete
icons are not visible when shaping an embroidery text.
Set Number of Objects
pop-up will appear allowing you to enter the total number
Note: It is the last added object that will be duplicated when entering a
wished number of objects.
7 Embroidery Edit
Select spacing
Select side
positioning
Select design
angle
Select line
Position
positioning
Rotate
Resize
Control center
Baseline
Shapes
Control
Point
Delete Last
Object
Set Number
of Objects
Duplicate
Last Object
Pan
7:13