Stitch Settings In Set Menu - Husqvarna Viking Designer Diamond Royale User Manual

STITCH SETTINGS IN SET MENU

If you want to check the balance or presser foot pressure
BALANCE
When sewing on special fabrics or doing a special
whole stitch. Change the picture on the screen to match
your sewn sample. When you sew again, the balance will
be corrected.
EXCLUSIVE SENSOR SYSTEM
FEATURE - SENSOR FOOT PRESSURE
senses the thickness of the fabric, embroidery or stitching
fabric feed.
Raise and lower the presser foot
The
The
To lower the presser foot, place the fabric under the
button or step on the foot control. To raise the presser
and raise the foot. When the needle stops in the down
your foot control. If you tap your foot control once you
will lower the presser foot. If you tap the foot control
twice the needle will be lowered into the fabric.
Note: With Needle Stop Down selected: when you stop sewing and
touch Sensor Foot Up the foot will raise but the needle stays in the
fabric. Touch Sensor Foot Up again to raise the needle.
4:10 4:10
4 Sewing
Stitch Settings
™
Sensor Foot Down and Pivot
Diamond Menu
SET Menu
Selective Thread Cutter
Sensor Foot Up and Extra Lift
Pan
Balance
Length
Sensor Foot
Pressure
Balance
Width