Sewing Settings; Twin Needle; Stitch Width Safety; Automatic Jump Stitch Trim - Husqvarna Viking Designer Diamond Royale User Manual

SEWING SETTINGS

Twin Needle

Touch the Twin Needle icon to open a list for twin needle
width selections. When a twin needle size is selected, the
width of all stitches is limited for the selected twin needle
you deselect the twin needle width.
When a twin needle size is selected, a pop-up message is
pop-up message is shown when selecting a stitch that is
too wide for the selected twin needle size. The stitch width

Stitch Width Safety

straight stitch presser foot. The needle position is locked
presser foot or needle plate.
This function is automatically selected, and cannot be
pop-up message informs you that it is set to straight stitch.
Note: Twin Needle and Stitch Width Safety cannot be used at the
same time.
Selective Thread Cutter Auto
automatically and the presser foot raises at color changes,

Automatic Jump Stitch Trim

machine will trim the top jump stitch thread and pull the
thread end to the underside of the fabric.
Note: The machine will also cut the thread after you have
changed to a new color. Hold the thread end when you start
embroidering again, so that you can easily remove the thread
end when cut.
3 Ultimate Interactive Screen
Trim. Jump stitch trim commands can be added to any
can be added to any design using the complimentary
Note: If the front and back of your embroidery will be visible, turn
off the Automatic Jump Stitch Trim and cut the threads manually.
3:7