Control Panel; Electromechanical Components; Display - DeDietrich Elidens DTG130-45 User Manual

3.2 Control panel

3.2.1

Electromechanical components

1 Main ON/OFF switch
Pressure gauge
* Depending on the model of the appliance, the pressure
2
gauge is manual (dial display) or automatic (pictogram

display)

3.2.2 Display
1 Text and numerical display
2 Graphic display bar for the programme in circuit A, B or C
Light area: Reduced temperature heating period or tank load
3
disabled
Dark area: Comfort temperature heating period or tank load
4
enabled
5 Flashing cursor showing the current time
Number display (current time, adjusted values, parameters,
6
etc.)
Active programme display, P1, P2, P3, P4
7 or
Su: automatic Summer cut-off
The arrows flash when setting values can be modified using
8
the + and - keys
18/06/2015 - 300005222-02
3
4
9
A, B, C
10
11
DTG130 - 45/65/90/115 Eco.NOx Plus
On light / Alarm
Green LED LIT: Normal operation
Red LED lit: Burner in safety condition
Flashing red Led: abnormal operation (See chapter "7
Troubleshooting")
Safety control box reset button
Circuit operation symbols
Opening the 3-way valve
Closing the 3-way valve
Displayed circuit pump on
Name of the circuit displayed
Symbol displayed above the active operating mode
Symbols indicating that the following inputs/outputs are
active
Burner on
DHW load pump on
Summer mode
Not available
7