Auto Pc Adjustment - Ask Proxima E1655U Owner's Manual

Computer input

Auto PC adjustment

Auto PC Adjustment function is provided to automatically adjust total dots, horizontal position, vertical position,
Display area H , and Display area V to conform to your computer.
Full menu operation
Auto PC adjustment
1. Press the F.MENU button to display the full screen
menu. Use the ▲▼ buttons to select the PC adjust
icon and press the ► button or SELECT button.
2. Press the ▲ ▼ buttons to select AUTO PC
Adjustment, and then press the SELECT button.
To store the adjusted parameters
The system parameters adjusted in the Auto PC Adjustment can be stored in the projector.
Note:
√
Total dots and horizontal & vertical positions of some computers cannot be fully adjusted with this Auto PC
Adjustment function. When the image is not provided properly with this operation, manual adjustments are
required.
The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p, 1035i,
or 1080i is selected in the PC System Menu
Auto PC adj.
Fine sync
Total dots
Horizontal
Vertical
Clamp
D i s p l a y a r e a H
D i s p l a y a r e a V
Reset
Mode free
Store
MENU
30
PC adjust menu
PC adjust
Exit Move Next
SELECT
16
0
0
0
1
0
0
Next