Selecting Av System - Ask Proxima E1655U Owner's Manual

AV Input

Selecting AV system

1. Press F. Menu on the remote control to display
the on-screen menu. Press ▲▼ to select the
icon for input source. Then press ► or press
Select.
2. Press ▲▼ to select " Component " , " video "
or " S -video " , and then press Select.
3. Press ▲▼ to select the system, and then press
► or press Select. Press ▲ ▼ to select the
signal format, then press Select.
Video or S-video.
Auto
The projector can automatically detect the input video
s ystem and optimize its own state. If the video
system is PAL-M or PAL-N, you should manually
select the system.
PAL/SECAM/NTSC/NTSC4.43/PAL-M/PAL-N
if can't reproduce the image, you should
The projector
select a specific signal format from PAL, SECAM,
NTSC, NTSC 4.43, PAL-M and PAL-N.
Component
Auto
The projector can automatically detect the input video
system and optimize its own state.
Component video signal format
The projector
If can't reproduce the image, you should
select a specific component video signal format
from 480i, 575i, 480p, 575p, 720p, 1035i and 1080i.
Note:
√
●
If SCART or HDMI is selected, AV system menu
will be disabled.
AV System Menu (Video or S-video)
HDMI
DVI
Computer 1
Computer 2
Component
S-video
Video 1
Video 2
RGBHV
SCART
System
Exit
MENU
AV System Menu (Component)
HDMI
DVI
Computer 1
Computer 2
Component
S-video
Video 1
Video 2
RGBHV
SCART
System
Exit
MENU
36
Input
Input
Move Next Next
SELECT
Input
Input
Move
Next Next
SELECT