Ask Proxima E1655U Owner's Manual page 42

Auto setup
This function enables Input search,
AUTO SETUP button on the top control or the
by pressing the
AUTO SET button on the remote
can be altered as follo ws:
Input search
This function detects the input signal automatically. When
a signal is found, the search will stop. Use the Point ▲▼
buttons to select one of the following options.
Off ........... Input search will not work.
On........... ..Active Input Sourcing fuction. It detects the
input signal and search stops when the signal is
found.
Auto PC Adjustment
On........... ..Press Auto Set button on the Top Control or
remote control to enable Auto PC Adjustment
function.
Off ........... Disables Auto PC Adjustment.
Keystone Correction
This function is used to store or reset the keystone
correction when the AC power cord is unplugged. Use the
Point ▲▼ buttons to switch between each option.
Store ...... ...... Keep the keystone correction even when
the AC power cord is unplugged.
Reset ...... ...... Release the keystone correction when the
AC power cord is unplugged.
To correct keystone distortion, press the SELECT button.
Keystone appears on the screen. Use the Point ▲▼
buttons to correct keystone distortion.
Blue back
You can use this item to set the background of
The time when no signal is detected.
You can press ▲▼ to switch over between the
items below:
ON: To enable the blue background for
projection;
OFF: To disable the blue background.
and Auto PC adjustment
control. Settings for those
41
NOTE:
• Only the last selected input source can be
detected.
• If the INPUT button on the top control or
the COMPUTER 1/2 buttons, VIDEO or
S-video or COMPONENT buttons on the
remote control is pressed during Input
search is in progress, Input search will stop
and go back to the previous input signal.
• Input Search, Auto PC Adj. can not
be set Off at the same time.
• Fine sync., Total dots, Horizontal and
Vertical position of some computers
cannot be fully adjusted with the Auto PC
Adjustment function. When the image is
not provided properly with this operation,
manual adjustments are required.
Setting