Rear Terminal - Ask Proxima E1655U Owner's Manual

Rear terminal

(1) Network port
Used to connect the network cable.
(2) COMPUTER IN2/MONITOR OUT
- Used to connect the computer output.
- Used to output the analog signals from (3) or
(6) to the other monitor.
(3) COMPUTER IN1/SCART IN
- Used to connect a computer or RGB SCART
output.
(4) DVI
Used to connect the DVI digital output.
(5) HDMI
Used to connect the HDMI digital output.
(6) BNC jacks
C onnect the component video output to Y, Cb
Cr or composite video output from video
equipment to VIDEO 2 terminal, or connect
the RGBHV format (5 line system) signal
to G, B, R, Hs, and Vs jacks.
1 2
3
8
6
7
8
Part names and functions
4
9 10 11 12
(7) S-VIDEO
Used to connect the S-video output of video
equipment.
(8) Composite (video) input jacks
Connect the composite signals to this
terminal.
(9) AUDIO IN3
Connect the audio to these jacks, When Video
equipment connected to INput3.
(10) AUDIO IN2
Connect the audio to this jack (stereo), When Video
equipment connented to INPUT2.
(1 1) AUDIO OUT
Used to output the audio from (9) or (10).
( 2 ) CONTROL
1
When using RS232 to control the projector,
please connect the serial control line to this
terminal.
5