Information; Display Input Source - Ask Proxima E1655U Owner's Manual

Information

Displaying input source
The information menu is used to detect signal of projected image and running state
Operation through menu
Press ▲▼ to select the information. And the information menu will appear.
You can then see the information displayed as follows:
Menu Operation
Press menu on the Top Control and then press SELECT
button to display on screen menu. Press the Point ▲▼
buttons to select the Information. The Information Menu is
displayed.
See below for displayed information.
Input
The selected input source is displayed.
H-sync freq .
The horizontal frequency of the input signal is displayed in
KHz, or - - - -KHz when no signal.
V-sync freq .
The vertical frequency of the input signal is displayed in Hz,
or - - - - Hz when no signal. Numbers of Hz doubles when
during Interlace.
Screen
The selected screen size is displayed.
Language
The selected language is displayed.
Lamp status
The selected lamp mode is displayed.
Lamp counter
The cumulative lamp operating time is displayed.
Power management
Off, Ready or Shut down is displayed.
Key lock
Display Off, Remote Control or the Projector.
Input
H-sync freq.
V-sync freq.
Screen
Language
Lamp status
Lamp counter
Power management
Key lock
Back
Exit
MENU
48
Information
Component
1080i
KH
z
H
z
Normal
English
A
10 H
Off
1 min
Move
SELECT