User Manual For Network Control - Ask Proxima E1655U Owner's Manual

Appendix

User manual for network control

Function : this function is for PC's to remote control projectors through LAN cable.
Preparation:
1. Equipments: PC, projector, cables
2. Connection procedures:
Connect the projector to routers or switches of the LAN by direct or cross cable. If it fails to connect PC and projector
by parallel cable, please switch to cross cable as suggested.
3. After the computer is booted and the projector is plugged in, indicator lights of LAN interface and computer interface
will flash continuously.
Operation procedures:
1. Turn on the projector
2. Obtain network address. DHCP set is displayed as on and obtain network address automatically. If familiar with
network, you can set DHCP as close and obtain network address manually.
3. Enter network settings menu.
(1) Press MENU button of the remote or press
MENU button of the projector first and then
SELECT. The MENU will display. Use arrow
button ▲▼ to select network icon.
(figure 1)
2) Press SELECT or ► to enter network menu.
(figure 2)
(3) Use arrow button ▲ ▼ to select network settings and then press SELECT.
(figure 3)
LAN Network Setting
ON
DHCP
. .
IP Address
. .
Subnet
Gateway . .
. .
DNS
set
62
.
.
.
(figure 3)
(figure 3)
.
cancel
(figure 1)
(figure 2)