Display
System
Computer system select
The projector automatically tunes to various types of computers with its function of Multi-scan
system and Auto PC Adjustment. If a computer is selected as a signal source, the projector
automatically detects the signal format and tunes to project proper images without any additional
setting.
One of the following messages may appear
when:
When the projector cannot recognize
Auto
the connected signal conforming to
the provided computer system, Auto
is displayed on the System menu
box and the Auto PC Adj. function
works to display proper images. If
the image is not projected properly,
a manual adjustment is required.
There is no signal input from
-----
computer. Check the connection
between your computer and
projector.
Select computer system manually
The system can also be selected manually.
1 Press MENU button on remote control to display
the screen menu.Press
Display icon, and press OK button.
2 Press
button to select System and press
OK button.
3 Press
button to select your required
system, and then press the OK button.
Note:
When HDMI is selected, System menu for
computer is disable.
32
button to select the
Screen Size
PC adjust
Keystone
Project Way
Display
Menu Position
Background Display
Color adjust
System
Setting
Expand
Info.
Move
System
System for computer signal
PC adjust
1024x768@60
1366x768@60
Display
----
----
Color adjust
----
Setting
Expand
Info.
Adjust
Normal
Stored
Front
Upper left
Blue
1024x768@60
Next
Exit
System
RGB(PC1)
Select
Back