Installation Specifications; Installation Table - Whisper Power M-SC6 Installation Manual

INSTALLATION

2 INSTALLATION SPECIFICATIONS

2.1

INSTALLATION TABLE

1 Install a steel foundation plate between ship's hull and
generating set, with 4 shock mounts (ref. to fig. 20)
'foundation plate' (optional for M-SC 6 and 8).
2 Mount the generating set directly to the foundation
plate.
3 Connect the (sea) water inlet to the strainer.
4 Connect exhaust system.
5 Connect a siphon breaker or 'air vent' into the cooling
circuit, if necessary.
6 Connect 'fuel supply line' to the water separator/ fuel
filter.
7 Connect 'fuel return line' to the fuel tank.
8 Connect remote panel (just plug in).
9 Connect the AC cable from the AC box to the power
source selector or Masterswitch.
10 Connect plus and minus from the 12V starter battery
to the battery cables.
11 Install a Whisper Power battery charger. (optional)
18
Fig. 20
December 2010 / M-SC 6/8/10 - 3000RPM / EN