Table of Contents
Advertisement
1 INTRODUCTION
1�1 USE OF THIS MANUAL
This manual serves as a guideline for the safe and effective
installation of the WhisperPower genverters for marine
applications.
It is obligatory that every person who is involved with the
installation of the genverter must be completely familiar with the
contents of this manual, and that he/she carefully follows the
instructions contained herein.
The information, specifications, illustrations and statements con-
tained within this publication are given with our best intentions
and are believed to be correct at the time of going to press.
Our policy is one of continued development and we reserve the
right to amend any technical information without prior notice.
Whilst every effort is made to ensure the accuracy of the partic-
ulars contained within this publication neither the manufacturer,
distributor, or dealer in any circumstances shall be held liable for
any inaccuracy or the consequences thereof.
Keep this manual in a secure place!
1�2 VALIDITY OF THIS MANUAL
All of the specifications, provisions and instructions contained
in this manual apply solely to standard versions of genverters
delivered by WhisperPower.
This manual is valid for the following models:
Description
230 VAC | 50 Hz
Piccolo 6 Adjustable
Kubota Z482-C
Piccolo 6 Ungrounded
Kubota Z482-C
120 VAC | 60 Hz
Piccolo 6 Adjustable
Kubota Z482-C
Piccolo 6 Ungrounded
Kubota Z482-C
Refer to the user's manual for identification of the genverter.
For other models see our website: www.whisperpower.com.
WARNING!
During installation and commissioning of the
genverter, the Safety Guidelines & Measures are
applicable at all times. See Chapter 2 of the user's
manual.
WARNING!
A warning symbol draws attention to special warnings,
instructions or procedures which, if not strictly
observed, may result in damage or destruction of
equipment, severe personal injury or loss of life.
DANGER!
This danger symbol refers to electric danger and
draws attention to special warnings, instructions or
procedures which, if not strictly observed, may result
in electrical shock which will result in severe personal
injury or loss of life.
WARNING!
Before working on the system read the safety
instructions in the user's manual.
1�3 INSTALLATION PARTS
Besides the parts that are included with the delivery you need at
least the parts listed at section 4.4 to install the genverter. Please
note that this listing may not be complete, as every installation
differs from the other. Oil is not included in the supply. Refer to
the user's manual for the right specifications.
2 INSTALLATION
2�1 GENERAL
To ensure reliability and durability of the equipment, it is very
important that the installation is carried out with the utmost care
and attention. To avoid problems, such as temperature problems,
noise levels, vibration, etc. The instructions set out in this manual
must be followed and all installation work must be carried out
only by qualified, authorized and trained personnel, consistent
with the locally applicable standards and taking into consider-
ation the safety guidelines and measures (Chapter 2 of the user's
manual).
WARNING!
T hegenverterincorporatespowerfulpermanent
magnets.Cardiacpatients,especiallythoseliving
withapacemaker,shouldbearthisinmind.
2�2 LOCATION
When looking for a proper place for a WhisperPower Piccolo-
genverter in a vessel all relevant aspects have to be taken into
account
•
Accessibility
•
Solid foundation
•
Space to mount the exhaust (refer to 2.9)
•
A route to fit the fuel lines
•
Combustion air supply (refer to 2.5)
Because of their small dimensions, WhisperPower genverters can
be installed in tight locations. Please consider that even almost
maintenance-free machinery must still remain accessible.
When selecting the location for the genverter, make sure there
is sufficient room to carry out any maintenance work. The unit
must be easily accessible on the service side.
Advertisement
Table of Contents
