Default - Qvis IPTZ-P400-10X User Manual

3.20 DEFAULT

MAIN MENU
INFORMATION
CAMERA
IMAGE
MOTION
RESTART
[ DEFAULT
EXIT
DEFAULT SETTING
[ RESTORE
DEFAULT
BACK
EXIT
RESTORE
RESET SETTINGS,
EXCEPT IP
[ OK
CANCEL
© Copyright Qvis ®. All documentation rights reserved.
]
]
]
Camera default function restores all
modified camera parameters to
default, instruction as follows:
1. Restore
Restore all configuration information
to factory default setting. (Except
gateway, IP, subnet mask, DNS
server)
2. Default
Restore all setting completely to
factory default setting status.
3. Operation method
Open camera OSD menu, click
up/down key to 'default setting', click
left/down key to default setting, then
click up/down to restore or default.
Click left/down, device will restore
settings. If user clicks up/down to
'BACK/EXIT', then they can return
previous OSD menu or exit OSD
menu
56