Qvis IPTZ-P400-10X User Manual page 17

 Operation methods for pattern scanning
1. Enter the pattern scan screen, it will show the current pattern scan path.
See 2.2.2-5
2. Start recording the scanning; click start to record the pattern scan, and
the start using the camera directional controls to adjust the movement
of the camera.
3. Stop recording scan; click save to save the scanning path.
4. Start and stop the pattern scan: click start to start the pattern scan, and
click the stop key to stop the pattern scan. See 2.2.2-6.
5. Delete the pattern scan: click delete key to delete the pattern scan.
 Operation methods for IR LED
Enter the IR LED setting screen to set the power of the low beam lights
between 1~10 amounts, the power of high beam lights, low beam lights
compensation, enable illumination, and IR status setting. See 2.2.2-7
© Copyright Qvis ®. All documentation rights reserved.
Picture 2.2.2.5 Sequence settings
Picture 2.2.2-6 Pattern settings
Picture 2.2.2-7 IR LED Setting Screen
10