Sequence - Qvis IPTZ-P400-10X User Manual

3.17 SEQUENCE

MAIN MENU
INFORMATION
CAMERA
IMAGE
[ MOTION
RESTART
DEFAULT
EXIT
MOTION
SCAN
[ SEQUENCE
PATTERN
BACK
EXIT
MOTION
[SEQUENCE No.
START PRESET
STOP PRESET
DURATION
SEQUENCE START
BACK
EXIT
© Copyright Qvis ®. All documentation rights reserved.
Auto sequence sets device to auto
switch to an appointed preset spot.
The user can a set time interval.
Device supports up to 8 sequence
path groups. Each path at most
supports 32 presets. Setting method
]
is as follows:
]
1]
1
10
5sec
1. Set sequence group number:
Click up/down key to
'Sequence', click up/down key
to 'Sequence No.', click
up/down key to 'Sequence
group', then click left/right key to
set sequence group number,
click up/down to operate next
step operation.
2. Start preset: Click up/down to
'Start preset', click left/right to
set start preset number,
between1-32 is settable.
3. Stop preset: Click up/down to
'Stop preset', click left/right to
set stop preset number,
between 1-32 is settable.
4. Duration: Click up/down to
'Duration', click left/right to set
duration time: 2sec, 5sec,
10sec, 30sec, 1min, 5min,
10min, 30min, and 60min. Total
of 9 optional time periods.
5. Sequence start: Click up/down
to 'Sequence start', click
left/right to start chosen
sequence group.
53