Pattern - Qvis IPTZ-P400-10X User Manual

3.18 PATTERN

MAIN MENU
INFORMATION
CAMERA
IMAGE
[ MOTION
RESTART
DEFAULT
EXIT
MOTION
SCAN
SEQUENCE
[ PATTERN
BACK
EXIT
PATTERN
[PATTERN No.
PATTERN SET
PATTERN DELETE
PATTERN START
BACK
EXIT
© Copyright Qvis ®. All documentation rights reserved.
The pattern function means the
camera can operate a series of
motions, e.g. pan/tile rotating, zoom,
etc. User can start a pattern to
playback all operations. The camera
supports up to 4 pattern tours and
]
each pattern cover a maximum of 10
minutes of 500 commands. Please
check the following steps to set up a
pattern:
1. Pattern No.: Click up/down key
2. Enable pattern: Click up/down to
]
3. Pattern Start: Click up/down to
4. Set Pattern Tour: Click up/down
1]
5. Delete pattern: Click up/down to
to highlight 'Pattern No.', click
up/down to set pattern number,
click left/right to choose.
'Pattern Set', click left/right to
start corresponding pattern path
number.
'Pattern start', click left/right to
start corresponding pattern no.
to highlight 'pattern set', click
left/right to set pattern mode.
User can control the horizontal
and vertical rotating movement,
and zoom trace. It will be
recorded to the device. When the
record is full or zoomed in/out to
limit, the pattern will finish setting.
delete, click left/right to delete
corresponding pattern number.
54