Alarm Setup; Abnormal Phenomenon Operation; Restore To Factory Default Setup; Irregular Ptz Movement - Qvis MINI-PTZ-23X-H User Manual


PARAMTER: Here you can set the serial number of the corresponding operation such as the scan, preset,
pattern, tour. Please use the left/right button to set.

BACK: Go back to the previous menu.

EXIT: Log out the system menu.

2.4.5 Alarm Setup

Move the cursor to highlight ALARM SETTING button and then click confirm button.

ALARM NO: This is to set the alarm input. Alarm input value ranges from 1 to 2. Please use the left/right
button on the keyboard or in the speed dome terminal menu to set.

ACTION: Action on alarm function. It includes NONE/PRESET/AUTO SCAN/TOUR functions. Please use
the left/right button on the keyboard or in the speed dome terminal menu to set.

PARAMETER: This is to set the corresponding alarm operation such as scan/preset/tour. Please use the
left/right button to set.

CONTACT：You can set system activation operation once alarm has been triggered. There are two alarm
signal mode: normal open (N/O) and normal closed (N/C). Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.
 RELAY OUT: This is to the set relay alarm mode and reset time. There are several options: off/1→5S.

RESET DELAY: This is for you to set the alarm reset time. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set: 3 seconds/10 seconds/30 seconds/60 seconds /120seconds.
The dome will go back to previous setup after alarm acknowledgement.

SAVE：Move the cursor to SAVE and then click confirm button to save current setup.

BACK: Go back to previous menu.

EXIT: Log out system menu.

2.5 Abnormal Phenomenon Operation

2.5.1 Restore to Factory Default Setup

From Main menu-> SYSTEM INFORMATION, move cursor to FACTORY DEFAULT and click confirm button.
Camera will reboot and all the setups restore to factory default setup.

2.5.2 Irregular PTZ Movement

From menu to SYSTEM INFORMATION, move cursor to RESTART and click confirm button. This reboot will not
modify all activated setup (such as preset, tour and pattern)
：1
ALARM NO
：NONE
ACTION
：NONE
PARAMETER
：N/O
CONTACT
：OFF
RELAY OUT
：3S
RESET DELAY
SAVE
BACK EXIT
19