Qvis IPTZ-P400-10X User Manual page 27

 Network → Email
Enter email settings, you will to fill in the following details; Sender,
sender address, SMTP
authentication, user name, password & password confirm, receiver,
and receiver address, see picture 2.2.5-12. Email detail settings are
shown in Picture 2.2.5-12.
Parameter
Stream Type
Video Type
Resolution
Bitrate Type
Image quality
Frame Rate
Max Bitrate
Video Encoding
I Frame Interval
© Copyright Qvis ®. All documentation rights reserved.
server, SMTP port, Tick start SSL or
Picture 2.2.5-12 Email
Instruction
Main stream/Sub stream
Video stream
1920*1080
Variable/Constant
Lowest/low/lower/medium/highest/higher
According to user's needs
Depending on resolution
According to user's needs
Frame between former and back(1-100)
Sheet 2.2.5-13 Video configuration instruction
20