Fluke 8845A Manual page 80

8845A/8846A
Programmers Manual
Function Commands and Queries
The commands in Table 21 lists the measurement function commands for the Fluke 45.
See Tables 22A and 22B for ranges and measurement rates. Commands under Primary
Display and Secondary Display cause functions to be performed using the primary
display or secondary display, respectively.
Commands
Primary
Display
AAC
ADC
—
CONT
DIODE
FREQ
FUNC1 ?
OHMS
VAC
VDC
70
Table 21. Fluke 45 Function Commands and Queries
Secondary
Display
AAC2 AC current
ADC2 DC current
CLR2 Clears measurement from secondary display if one shown.
— Continuity test. Available in the primary display only.
DIODE2 Diode test
FREQ2 Frequency
— Meter returns the function selected for the primary display as
command mnemonic.
EXAMPLE: If frequency is selected for the primary display,
"FUNC1?" returns "FREQ".
FUNC2? Meter returns the function selected for the secondary display as
command mnemonic. If the secondary display is not in use, an
Execution Error is generated.
EXAMPLE: If frequency is selected for the secondary display,
FUNC2? returns "FREQ".
OHMS2 Resistance
VAC2 AC volts
VDC2 DC volts
Function