Fluke 8845A Manual page 60

8845A/8846A
Programmers Manual
[SENSe:]FRESistance[:DC]:FILTer:DIGital[:STATe](?) <n>
Description Activates or deactivates the digital averaging filter to improve noise
Parameters <n>
Examples
Query
[SENSe:]UNIT:TEMPerature(?) <units>
Description Sets the temperature units for the temperature function. This setting is
Parameters <units>
Examples
Query
[SENSe:]ZERO:AUTO <n>
Description Activates (default) or deactivates the autozero mode. This setting is stored
Parameters <n>
Examples
Query
[SENSe:]VOLTage[:DC]:IMPedance:AUTO(?) <n>
Description Activates or deactivates (default) the automatic input impedance mode for
Parameters <n>
Examples
Query
50
immunity for the 4-wire resistance function. This setting is stored in
volatile memory.
= OFF or 0
ON or 1
FRES:FILT:DIG ON
FRES:FILT:DIG?
stored in volatile memory.
= Cel
Far
Kel
UNIT:TEMP C
UNIT:TEMP?
in volatile memory.
= OFF
ON
ONCE
ZERO:AUTO ON
ZERO:AUTO?
dc voltage measurements. With AUTO OFF, the input impedance is fixed
at 10 MΩ for all ranges. With AUTO ON, the input impedance is set to
>10 GΩ for the 100 mV, 1 V, and 10 V ranges. This setting is stored in
volatile memory.
= OFF or 0
ON or 1
VOLT:IMP:AUTO ON Turns on automatic input impedance.
VOLT:IMP:AUTO?
Turns the digital averaging filter off.
Turns the digital averaging filter on.
Turns the digital averaging filter on.
Returns the digital averaging filter setting. (0 =
OFF and 1 = ON)
Sets temperature units to Celsius
Sets temperature units to Fahrenheit
Sets temperature units to Kelvin
Sets temperature units to Celsius.
Returns the temperature units setting. (C =
Celsius, F = Fahrenheit, and K = Kelvin)
Turns Autozero mode off.
Turns autozero mode on.
Initiates a zero measurement immediately.
Turns autozero mode on.
Returns the state of the autozero mode. (0 = OFF
and 1 = ON)
Turns off automatic input impedance.
Turns on automatic input impedance.
Returns the state of the input impedance mode.
(0 = OFF and 1 = ON)