Fluke 8845A Manual page 110

8845A/8846A
Programmers Manual
Error Code
560
570
572
580
581
583
584
585
586
587
588
589
590
591
592
593
594
801
802
803
100
Table 34. Ethernet/IEEE-488 Configuration Errors
Error Text
GPIB fatal error
GPIB primary address
GPIB Read
EDVR
ECIC
EADR
EARG
ESAC
EABO
ENEB
EOIP
ECAP
EFSO
EBUS
ESTB
ESRQ
ETAB
ENET Port number
ENET Server
ENET Timeout
Description
A fatal error occured opening the GPIB port.
An error occured attempting to set the GPIB primary address.
An error occurred while attempting to read characters from the
GPIB port.
GPIB - DOS Error.
GPIB - Specified GPIB Interface Board is Not Active Controller.
GPIB - Interface Board has not been addressed properly.
GPIB - Invalid argument.
GPIB - Specified GPIB Interface Board is not System
Controller.
GPIB - I/O operation aborted (timed out).
GPIB - Non-existent GPIB board.
GPIB - Routine not allowed during asynchronous I/O operation.
GPIB - No capability for operation.
GPIB - File System Error.
GPIB - Command byte transfer error.
GPIB - Serial poll status byte lost.
GPIB - SRQ stuck in ON position.
GPIB - Table problem.
Port value is out of range (1024 to 65535).
Could not open the ethernet port.
Time-out occured while opening the ethernet port.